Study of Compatibilized Liquid Crystalline Polymer/Cyclic Olefin Copolymer Blends

The technology to produce compatibilized blends of liquid crystalline polymer and highly amorphous cyclic olefin copolymers through two novel approaches were studied. The first approach was to use silane-functionalized halloysite nanotube as nonspecific compatibilizer and the second method was reactive compatibilization. The study of blends and their resulting microstructure; their thermal, mechanical, and viscoelastic properties were investigated. The kinetic study of blends compatibilized through both routes was performed.     

Numerical modeling assessment of mechanical effect in bovine leather drying process

Leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture and generates important heat gradients. The numerical model presented in this study has been developed to describe the drying process of porous medium: bovine leather that undergoes deformation due to shrinkage. The mathematical formulation of fundamental heat, mass and momentum transfers’ phenomena during drying summarizes a two-dimensional model considering elastic behavior of bovine leather. The evolution of moisture content, temperature, and mechanical stresses during drying was discussed. The model was validated with experimental results. Numerical simulations show good agreement with experimental results. The study shows that the elastic model keeps the stress sign at the final stage of drying. The deformations induce tensional stresses near the surface equilibrated by compressive stresses within the product. They reached their maximum for normal stresses equal to 5.97 and 3.52?MPa at around 2145 and 868?s, respectively, for normal stresses along x and y directions and then decrease.     

Prolong the durability of La2Zr2O7/YSZ TBCs by decreasing the cracking driving force in ceramic coatings

Service lifetime and thermal insulation performance are both crucial for the application of thermal barrier coatings (TBCs). In this study, layered structure design under equivalent thermal insulation conception is introduced to lower the cracking driving force in TBCs, and with the goal of prolonging TBCs lifetime. Three groups of layered LZO/YSZ TBCs were designed with same thermal insulation of 500?μm YSZ, the LZO layers were deliberately designed with different initial elastic modulus. Virtual crack closure technique (VCCT) calculation result showed that the energy release rates at the crack tips are 28.2, 22, and 18.8?N/m corresponding to the initial elastic modulus of 70, 60, and 50?GPa. After gradient thermal cyclic tests with surface temperature of 1300?°C, TBCs with lowest initial elastic modulus showed the longest lifetime, and more than double of pure YSZ TBCs. This study provides a new option for the improvement of TBCs lifetime.     

Thermal-stability of electric field-induced strain and energy storage density in Nb-doped BNKT-ST piezoceramics

In this work, the relationship between the structural mechanisms and macroscopic electrical properties of the Nb-modified 0.96(Bi_0.5Na_0.84K_0.16TiO₃)–0.04SrTiO₃ (BNKT–ST) system were elucidated by using temperature dependent and in situ synchrotron X-ray diffraction (XRD) techniques. For the composition x?=?0.0175, a large-signal piezoelectric coefficient (S_max/E_max?=?d₃₃*) of 735 pm?V^?1 at 6?kV mm^?1 was observed at room temperature. Interestingly, at a higher temperature of 110?°C, the sample still showed a large d₃₃* of 570 pm V^?1. Furthermore, the temperature-invariant electrostrictive coefficient for this sample was found to be 0.0285?m⁴?C^?2 over the temperature range of 25–170?°C. Moreover, the energy density for x?=?0.030 sample was ～1.0?J?cm^?3 with an energy storage efficiency of ?70% in the temperature range of 25–135?°C. These results suggest that the synthesized Nb-modified BNKT–ST system is promising for the design of ceramic actuators as well as capacitor applications.     

Cyclic Peptide Mimotopes for the Detection of Serum Anti–ATIC Autoantibody Biomarker in Hepato-Cellular Carcinoma

Tumor-associated (TA) autoantibodies have been identified at the early tumor stage before developing clinical symptoms, which holds hope for early cancer diagnosis. We identified a TA autoantibody from HBx-transgenic (HBx-tg) hepatocellular carcinoma (HCC) model mouse, characterized its target antigen, and examined its relationship to human HCC. The mimotopes corresponding to the antigenic epitope of TA autoantibody were screened from a random cyclic peptide library and used for the detection of serum TA autoantibody. The target antigen of the TA autoantibody was identified as an oncogenic bi-functional purine biosynthesis protein, ATIC. It was upregulated in liver cancer tissues of HBx-tg mouse as well as human HCC tissues. Over-expressed ATIC was also secreted extracellularly via the cancer-derived exosomes, which might cause auto-immune responses. The cyclic peptide mimotope with a high affinity to anti-ATIC autoantibody, CLPSWFHRC, distinguishes between serum samples from HCC patients and healthy subjects with 70.83% sensitivity, 90.68% specificity (AUC = 0.87). However, the recombinant human ATIC protein showed a low affinity to anti-ATIC autoantibody, which may be incompatible as a capture antigen for serum TA autoantibody. This study indicates that anti-ATIC autoantibody can be a potential HCC-associated serum biomarker and suggests that autoantibody biomarker’s efficiency can be improved by using antigenic mimicry to native antigens present in vivo.     

纳米银-聚合物薄膜的制备及力电性能测试

聚合物基底上纳米银颗粒薄膜的制备工艺相对简单,成本较低,且该薄膜具有成为高敏感性压阻应力/应变传感材料的潜力。本文采用银镜制备法在聚酰亚胺(PI)和聚乙烯(PE)上合成了纳米银颗粒薄膜,系统研究了该薄膜制备工艺、结构特性、材料性能之间的关系。实验考察了材料“浸泡”时间及聚合物材料前处理等因素对材料表面吸附纳米颗粒含量的影响,研究了 “浸泡”时间对纳米银颗粒粒径大小、颗粒含量及分布的影响,并探讨了不同聚合物基体的颗粒特性对薄膜二维导电渗滤,压阻特性及拉伸性能的影响。研究表明,增加“浸泡”时间能够增加纳米银颗粒粒径大小,提高银颗粒的含量及分布均匀性；在相同的制备条件下,PI基底较PE基底对纳米银颗粒具有更加优异的吸附效果；在PI 和PE基底上的纳米银颗粒薄膜均表现出显著的压阻性能,且电阻对应变的敏感性随应变的增大及银颗粒含量的减少而显著提高。     

Enzymatic Synthesis of 1‐Alkyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate Using a Novel Lysoplasmalogen‐Specific Phopholipase D

Many phospholipase Ds (PLDs) are known to catalyze transphosphatidylation as well as hydrolysis of phospholipids. Transphosphatidylation of lysoplasmalogen (LyPls)‐specific phospholipase D (LyPls‐PLD), which catalyzes hydrolysis of ether lysophospholipids such as LyPls and 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine (Lyso‐PAF), still remains unclear. This study aims to reveal the transphosphatidylation activity of LyPls‐PLD, that is, the production of cyclic ether lysophospholipid. The enzymatic reaction is conducted in a buffer system, and the reaction products of a novel LyPls‐PLD from Thermocrispum sp. are investigated using mass spectrometry (MS). MS analyses demonstrate the reaction products to consist of 100% 1‐hexadecyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate (cLyPA) and choline from Lyso‐PAF; however, 1‐alkenyl‐2‐hydroxy‐sn‐glycero‐2,3‐cyclic‐phosphate from 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphocholine and 1‐O‐1′‐(Z)‐octadecenyl‐2‐hydroxy‐sn‐glycero‐3‐phosphoethanolamine is not produced. These results are expected to help in elucidating the catalytic mechanism of LyPls‐PLD, that is, the rate‐limiting step, and indicate LyPls‐PLD to be useful for the one‐pot synthesis of cLyPA. Practical Applications: A novel phospholipase D, LyPls‐PLD, can exclusively synthesize cLyPA from Lyso‐PAF using a one‐step enzymatic reaction without an organic solvent. cLyPA could be expected to show bioactivities similar to those of cyclic phosphatidic acid, which promotes normal cell differentiation, hyaluronic acid synthesis, antiproliferative activity in fibroblasts, and inhibitory activity toward cancer cell invasion and metastasis.     

Highly Stretchable and Sensitive SBS/Graphene Composite Fiber for Strain Sensors

Flexible strain sensors have attracted tremendous interests due to the emergence of intelligent wearable technology. Electrically conductive fibers are desirable candidates for flexible strain sensors, but up til now, there still exist enormous challenges to obtain conductive fibers exhibiting simultaneously high stretchability and high strain sensitivity. This paper introduces a poly (styrene‐butadiene‐styrene) (SBS)/graphene (Gr) composite fiber‐based flexible strain sensor fabricated by a facile and highly scalable wet spinning method. The results demonstrate that the graphene content has significant influence on the morphology, mechanical properties, and electromechanical properties of the composite fibers. The fibers with 5 wt% graphene have a wide response range of up to 100% strain, a high electrical sensitivity with the gauge factor of 10083.98 at 100% strain, and meanwhile, a high level of stability for 2100 stretching–releasing cycles under an applied strain of 20%. Furthermore, the SBS‐5%Gr composite fibers display excellent sensing performance in detecting human upper limb movements at different joints including hand joints, wrist joints, elbow joints, and shoulder joints.     

Assessment of local strain field in adhesive layer of an unsymmetrically repaired CFRP panel using digital image correlation

The present study focuses on experimental investigation of through the thickness displacement and strain field in thin adhesive layer in single sided (unsymmetrical) patch repaired CFRP (carbon fiber reinforced polymer) panel under tensile load. Digital image correlation (DIC) technique is employed to acquire the displacement and strain (longitudinal, peel and shear) field. Experimental determination of shear transfer length based on shear strain field obtained from DIC is introduced to estimate the optimum overlap length which is an essential parameter in patch design for the repair of CFRP structures. Further, DIC experiment with magnified optics is performed to get an insight into complex and localized strain field over thin adhesive layer especially at critical zones leading to damage initiation. The failure mechanism, load displacement behavior, damage initiation and propagation are closely monitored using DIC. The influence of patch edge tapering on strain distribution in adhesive layer is also investigated. The DIC successfully captures the global and localized strain field at critical zones over thin adhesive layer and further helps in monitoring the damage based on strain anomalies. Strains are found to have maximum magnitude at the patch overlap edge and the shear strain level in adhesive layer is higher than the peel strain. Normal tapering increases the peel strain and has negligible influence on shear strain level in adhesive layer. The recommended overlap length is found to be consistent with the recommendation in the literature. Whole field strain pattern and the overlap length obtained from experiment are further compared with the finite element analysis results and they appear to be in good coherence.